Cappers

In Line Cappers

Automatic Inline Bottle Capping Machine Model TruCap-X-Vert

ACASI Inline Bottle Capper with Vertical wheel cap feeder

Model TruCap-X-Vert

 

 1 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to 14” inches tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
  • Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission
  • Adjustable speed 3/4 Hp drive motor for capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty 3/4 Hp, motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. Optional double belt assembly with independent height and angle adjustment
  • Mechanical bottle cap sorting, requires no fine
  • tuning
  • Once setup, caps will only be dispensed in the correct orientation
  • 24” diameter feeding disc
  • Interchangeable sorting rings
  • Easy changeover for caps from 15mm to 53mm in diameter, with appropriate tooling
  • Sorter mounted on machine, no need for independent height adjustment
  • Driven by 1/4 Hp DC gear motor
  • Speed controlled via potentiometer
  • 3 Cubic feet integrated cap hopper

 

Automatic Inline Bottle Capping Machine Model TruCap-X-Cent

ACASI Inline Bottle Capper with Centrifugal cap feeder

Model TruCap-X-Cent

 

 2 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle machine configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness
  • Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission
  • Adjustable speed 1/2 Hp drive motor for bottle capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Bottle capping disc position is adjustable while the machine is running, without opening the safety covers
  • Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission
  • Adjustable speed heavy duty 1/2 Hp, motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
  • Optional double belt assembly with independent height and angle adjustment

Centrifugal type cap feeder features:

  • Construction in stainless steel
  • 32” diameter feeding disc ramp assembly.
  • Cap rejecting by photoelectric sensor.
  • Cap by demand controlled by photoelectric sensor
  • Standard 4 pieces slotted cross for easy tooling adjustment
  • Easy changeover for caps from 10mm to 90mm in diameter
  • Easy changeover for caps from 0.125 to 2.5” in height
  • Sorter mounted on machine, no need for independent height adjustment.
  • Includes filter pressure regulator
  • Flow controls on all air hoses
  • Adjustable vibration system on cap hopper
  • Force provided by 1/3 Hp DC gear motor
  • Speed control by potentiometer
  • Cap hopper features:
  • 3 Cubic feet stainless steel deposit.
  • Vibrator with independent control mounted on cap hopper
  • Low friction limit switch for cap level sensing on centrifugal cap feeder

 

Automatic Inline Bottle Capping Machine Model TruCap-X-WFall

ACASI Inline Bottle Capper with Waterfall cap feeder

Model TruCap-X-WFall

 

 3 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to14” tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle machine configurations available, single gear box driven
  • Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
  • Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission
  • Adjustable speed 1/2 Hp drive motor for bottle capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers
  • Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty 1/2 Hp, motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
  • Optional double belt assembly with independent height and angle adjustment
  • Waterfall feeder features:
  • Construction in stainless steel
  • 18” wide belt
  • Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
  • Caps feed on demand, controlled by photoelectric sensor
  • Air shutoff valve controlled by photoelectric sensor
  • Includes filter regulator
  • Feeder inclination adjustable from 0 to 5 degrees
  • Complete height adjustment by structure 1” bolts and/or cap delivery system.
  • 10 cubic foot cap hopper
  • Dive provided by DC gear motor.
  • Independent speed control (potentiometer)

 

Inline Bottle Cap Tightener – Model TruCap

ACASI Inline Bottle Cap Tightener Model TruCap

 

 4 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)
  • Capping discs features:
  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded bottle capping discs for better torque and misalignment forgiveness
  • Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission Adjustable speed 1/2 Hp drive motor for capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Capping head assembly manufactured in 316L stainless steel
  • 95% of manufactured parts are in stainless steel, or FDA approved polymer materials.
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter
  • Bottle belts features:
  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission. Adjustable speed heavy duty 1/2 Hp, motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment

 

Automatic Inline Bottle Capping Machine Model CAI-X-WFall

ACASI Inline Cap Tightener Model CAI-10X

 

 5 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

  • 4, 6 or 8 spindle configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness
  • Torque is able to be adjusted while the machine is running
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism; no belts used for power transmission
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Adjustable speed 1 Hp/3 phase drive motor for capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Most bearings protected by seals
  • Capping head assembly manufactured in 316L stainless steal
  • All parts manufactured in stainless steel or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers
  • Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism; no belts used for power transmission
  • Adjustable speed heavy duty 1 Hp/3 phase motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
  • Optional double belt assembly with independent height and angle adjustment
  • Electric and pnuematic requirements:
  • 208 – 240 Volts/ single phase/ 50/60Hz/ 15 Amps
  • 5 CFM @ 80 p.s.i.
  • ACASI Cap Feeder Model CF-4400

Features:

  • Construction in stainless steel
  • 18” wide belt
  • Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
  • Caps feed on demand; controlled by photoelectric sensor
  • Air shutoff valve controlled by photoelectric sensor
  • Includes filter regulator
  • Feeder inclination adjustable from 0 to 5 degrees
  • Complete height adjustment by structure 1” bolts and/or cap delivery system
  • 10 cubic feet cap hopper
  • Drive provided by DC gear motor
  • Independent speed control (potentiometer)

 

Inline Cap Tighteners

ACASI Inline capping machine model CAI-10X

 

 6 Tightener features:

  • Heavy duty 304 Stainless steel welded C frame for easy mounting in existing conveyors.
  • Heavy duty linear carriage system for height adjustability.
  • All shafts and threaded rods manufactured in 304 stainless steel.
  • Heavy duty casters standard.
  • No change of parts needed for a wide range of containers.
  • Front and back covers with safety interlock standard.
  • Top driven to insure no product spillage into drive assembly.
  • Fully adjustable from 1 inch to 14 inch high containers. (Optional electrical height adjustment).

Capping discs features:

  • Available configuration of 4, 6 and 8  capping discs.
  • Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
  • Adjustability of torque while the machine is running.
  • Clutches located away from capping discs to avoid corrosion.
  • Heavy duty gear driven mechanism, no belts used for power transmission.
  • Mechanical or pneumatic clutches available.
  • Adjustable speed ½ Hp 3 phase for 4 and 6 capping discs, 1 Hp 3 phase 8 capping discs.
  • Optional separate motor for first capping disc set opposite rotation direction.
  • Most bearings protected by seals.
  • Capping assembly manufactured in 316L stainless steel.
  • All parts manufactured in stainless steel or strong FDA approved plastic materials.
  • Independent front or back capping discs adjustability.
  • Adjustability of capping discs position while the machine is running without opening the safety covers.
  • Fully adjustable for caps from 8 mm to 130 mm.

Bottle belts features:

  • Bottle belts width adjusted through front knobs.
  • Bottle belts height adjusted via front knobs.
  • Heavy duty gear driven mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox.
  • Each belt has additional independent width adjustability to be able to hold the container in different widths.
  • Double belt with independent height adjustability (Optional).
  • Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
  • Bottle belts angle adjustability for tapered bottles.
  • Electric and pneumatic requirements:
  • 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 5 CFM @ 80 p.s.i. (Only with pneumatic clutches)

 

 

Hand-Held Bottle Capper – Model CS 1000

ACASI Machinery manufactures capping machines and bottle capper equipment in both automatic and handheld models

 

 7 Features:

  • Top weight balancer
  • Capping by coned shaped polyurethane insert
  • Torque adjustment by mechanical clutch
  • Air operated (5 CFM @ 80 p.s.i)
  • Up to 80 containers per minute
  • Quick release for capping insert holder (For fast changeovers)

 

Automatic Inline Bottle Capping Machine Model CAI-X-Cent

ACASI Inline capper Model CAIX-5200

 

 8 Tightener features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1” to 14” tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Adjustable speed 1 Hp/3 phase drive motor for capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Most bearings protected by seals
  • Capping head assembly manufactured in 316L stainless steel
  • All parts manufactured in stainless steel, or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers
  • Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment
  • Electric and pneumatic requirements:
  • 208 – 240 Volts/single phase/ 50/60Hz/15 Amps.
  • 5 CFM @ 80 p.s.i.

Centrifugal type cap feeder features:

  • Construction in stainless steel
  • 32” diameter feeding disc – ramp assembly
  • Cap rejecting by photoelectric sensor
  • Cap by demand controlled by photoelectric sensor
  • Standard 4 pieces slotted cross for easy tooling adjustment.
  • Easy changeover for caps from 10mm to 90mm in diameter
  • Easy changeover for caps from 0.125 to 2.5” in height.
  • Sorter mounted on machine, no need for independent height adjustment
  • Includes filter regulator
  • Flow controls on all air hoses.
  • Adjustable vibration system on cap hopper.
  • Force provided by 1/3 Hp DC gear motor
  • Speed control by potentiometer

Cap hopper features:

  • 3 Cubic feet stainless steel hopper
  • Vibrator with independent control mounted on cap hopper.
  • Low friction limit switch for cap level sensing on centrifugal cap feeder

Options:

  • Upgrade of each set of clutches
  • Double belt assembly, independent belt, height adjustable
  • Power height adjustment upgrade
  • Additional drive motor to reverse the first set of spindles
  • Class 1 Division 1 Explosion Proofing
  • Spacing wheel assembly to control bottle feed into machine
  • Bottle reject system, with laser sensor for uncapped containers or cross threaded caps. Includes dump table.
  • Pressure cap wheel
  • Nylon U Channel for spray an

Chuck Cappers

Chuck CappersChuck bottle capper model PC1-JAW-VIB

ACASI single head chuck bottle capper with vibratory type cap feeder model PC1-VIB

 image Capper features:

  • Designed to place plastic or metal caps on a wide range of containers – enclosures
  • Includes one set of change of parts (star wheel, outer guide, cap delivery and chuck)
  • Acasi magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
  • Pick and place mechanism in stainless steel. Cap is delivered to the chuck, then the chuck comes down holding the cap (This prevents cross-threading)
  • Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure.
  • Heavy duty 304 Stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool-less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

  • Aluminum casting with polyurethane liner to minimizes cap marking-scratching
  • 24” diameter feeding disc – ramp assembly.
  • Bad caps rejected mechanically, minimum air usage.
  • Cap by demand controlled by photoelectric sensor.
  • Bowl tooled for one model cap
  • Adjustable vibration and speed control
  • Heavy duty extra heavy base for better vibration central
  • Sorter mounted on machine, no need for independent height adjustment
  • Includes filter regulator.
  •  Flow controls on all air hoses.

 

 

 

ROP1-VIB Capping Machine

ACASI single head ROPP bottle capper with vibratory feeder model ROP1-VIB

 

 image (1)  Capper features:

  • Designed to place and form metal caps on a wide range of containers – enclosures.
  • Price includes one set of change of parts (star wheel, outer guide and cap delivery)
  • ACASI ROPP capping head model VA90, manufactured in 304 stainless steel and hardened forming discs
  • Bottle will pick up cap and the container will be indexed into position
  • Fully adjustable from 7” to 14” high containers (special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Center CAM manufactured in special cam rated plastic material
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure
  • Heavy duty 304 stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming.
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

  • Aluminum casting with polyurethane liner to minimizes cap marking-scratching
  • 24” diameter feeding disc – ramp assembly
  • Bad caps rejected mechanically, minimum air usage
  • Cap by demand controlled by photoelectric sensor
  • Bowl tooled for one model cap
  • Adjustable vibration and speed control
  • Heavy duty extra heavy base for better vibration central
  • Sorter mounted on machine, no need for independent height adjustment
  • Includes filter regulator
  • Flow controls on all air hoses

 

Chuck bottle capper model PC1

ACASI single head chuck bottle capper with waterfall type cap feeder

Model PC1-4400

 image (2)  Capper features:

  • Designed to place plastic or metal caps on a wide range of containers – enclosures
  • Price includes one set of change parts (star wheel, outer guide, cap delivery and chuck)
  • ACASI magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
  • Pick and place mechanism in stainless steel. Cap is delivered to the chuck, and then the chuck comes down holding the cap (This prevents cross- threading)
  • Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Center CAM manufactured in special cam rated plastic material
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure
  • Heavy duty 304 stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool-less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required.
  • Cap feeder and orienting features:
  • Construction in stainless steel
  • 18” wide belt
  • Belt spacing designed for your application, can accommodate caps from 8 mm to 110 mm in diameter
  • Cap by demand controlled by photoelectric sensor
  • Air shutoff valve controlled by photoelectric sensor
  • Includes filter regulator
  • Knob adjustments of cap delivery system from 8mm to 110mm
  • Inclination range from 0 to 5 degrees
  • Complete height adjustment by structure 1 inch bolts and/or cap delivery system
  • 10 cubic foot cap hopper
  • System drive provided by DC gear motor
  • Speed control by potentiometer
Chuck CappersChuck bottle capper model PC1-JAW-VIBACASI single head chuck bottle capper with vibratory type cap feeder model PC1-VIB
 image Capper features:

  • Designed to place plastic or metal caps on a wide range of containers – enclosures
  • Includes one set of change of parts (star wheel, outer guide, cap delivery and chuck)
  • Acasi magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
  • Pick and place mechanism in stainless steel. Cap is delivered to the chuck, then the chuck comes down holding the cap (This prevents cross-threading)
  • Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure.
  • Heavy duty 304 Stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool-less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

  • Aluminum casting with polyurethane liner to minimizes cap marking-scratching
  • 24” diameter feeding disc – ramp assembly.
  • Bad caps rejected mechanically, minimum air usage.
  • Cap by demand controlled by photoelectric sensor.
  • Bowl tooled for one model cap
  • Adjustable vibration and speed control
  • Heavy duty extra heavy base for better vibration central
  • Sorter mounted on machine, no need for independent height adjustment
  • Includes filter regulator.
  •  Flow controls on all air hoses.

 

 

 

ROP1-VIB Capping MachineACASI single head ROPP bottle capper with vibratory feeder model ROP1-VIB

 

 image (1)  Capper features:

  • Designed to place and form metal caps on a wide range of containers – enclosures.
  • Price includes one set of change of parts (star wheel, outer guide and cap delivery)
  • ACASI ROPP capping head model VA90, manufactured in 304 stainless steel and hardened forming discs
  • Bottle will pick up cap and the container will be indexed into position
  • Fully adjustable from 7” to 14” high containers (special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Center CAM manufactured in special cam rated plastic material
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure
  • Heavy duty 304 stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” are manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming.
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required

Vibratory cap feeder features:

  • Aluminum casting with polyurethane liner to minimizes cap marking-scratching
  • 24” diameter feeding disc – ramp assembly
  • Bad caps rejected mechanically, minimum air usage
  • Cap by demand controlled by photoelectric sensor
  • Bowl tooled for one model cap
  • Adjustable vibration and speed control
  • Heavy duty extra heavy base for better vibration central
  • Sorter mounted on machine, no need for independent height adjustment
  • Includes filter regulator
  • Flow controls on all air hoses

 

Chuck bottle capper model PC1ACASI single head chuck bottle capper with waterfall type cap feederModel PC1-4400
 image (2)  Capper features:

  • Designed to place plastic or metal caps on a wide range of containers – enclosures
  • Price includes one set of change parts (star wheel, outer guide, cap delivery and chuck)
  • ACASI magnetic clutch capping head model MJ90 (Magnetic with Jaws), visual torque setting for ease of adjustment, manufactured in 304 stainless steel
  • Pick and place mechanism in stainless steel. Cap is delivered to the chuck, and then the chuck comes down holding the cap (This prevents cross- threading)
  • Fully adjustable from 7” to 14” high containers. (Special configurations available on request)
  • Maximum bottle diameter with 12 pocket star wheel: 4.25”
  • Maximum bottle diameter with 6 pocket star wheel: 8.00”
  • Center CAM manufactured in special cam rated plastic material
  • Automatic start and stop with presence or absence of containers
  • 12 or 6 pocket center star wheel for container handling (Depends on the size of the container)
  • Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills)
  • 2 Hp AC motor with frequency drive speed control
  • Stainless steel electric enclosure
  • Heavy duty 304 stainless steel welded frame
  • Stainless steel enclosure with polycarbonate windows and safety switches
  • All shafts from ¼ to 2.5” manufactured in 304 stainless steel
  • Gear driven transmission machine to avoid timing loss
  • Complete height adjustment with bottle setting guide for quick changeovers
  • Tool-less changeovers for star wheels and most change parts

Cap chute features:

  • All contact parts in stainless steel
  • Designed and tested for each cap to avoid jamming
  • Includes cap demand sensor to start and stop the cap feeder
  • Quick change over, since parts are pin guided so no tweaking is required.
  • Cap feeder and orienting features:
  • Construction in stainless steel
  • 18” wide belt
  • Belt spacing designed for your application, can accommodate caps from 8 mm to 110 mm in diameter
  • Cap by demand controlled by photoelectric sensor
  • Air shutoff valve controlled by photoelectric sensor
  • Includes filter regulator
  • Knob adjustments of cap delivery system from 8mm to 110mm
  • Inclination range from 0 to 5 degrees
  • Complete height adjustment by structure 1 inch bolts and/or cap delivery system
  • 10 cubic foot cap hopper
  • System drive provided by DC gear motor
  • Speed control by potentiometer