Printers

Manufacturers: Loveshaw and Zanasi

Drop on demand
MicroJet series	Available in four models: one line of 11/32″ (5 x 5 dot matrix), one line of 11/32″ (5 x 7 dot matrix), two line of 11/32″ (5 x 11 dot matrix) and three line of 11/32″ (5 x 16 dot matrix). Ideal for product or date code identification on porous surfaces (i.e. corrugated containers) Automatic date and time coding Day of week designation Julian dating Alpha/numeric incrementing Automatic box counting Dot size, product delay and character width are controlled on keys on the membrane housed within the single enclosure Low ink warning light Comes equipped with mounting block and “L” bracket that allows adjustment on two axis One litre disposable ink container or pressurized 5 litre bulk feed system Choice of 50 upper case characters, numbers, symbols, foreign characters, 39 characters per message line standard 250,000 characters per litre, subject to ± 20% variation due to purging schedules, etc.
Hi-Res (High resolution)
HRP	Reliable, low cost ink jet printhead Available in 1/2″ and 1″ high models – encoder may be required for some 1″ applications One line with 0.45″ character height or two lines at 0.15″ character height – 1/2″ printhead The 1″ printhead is capable of printing up to 10 lines of data including alphanumerics, logos and UPC-A bar codes onto porous or non-porous surfaces Highly reliable thermal jet technology High-resolution printing Printing at speeds of up to 200′ per minute Easy-to-change ink cartridges Up to 0.25″ ink throw distance with porous ink Constructed of an enclosed, industrial-grade housing with stainless steel faceplate and hinged cover to access ink cartridge Built-in photo sensors to detect product speed and direction. Smart Level ink detection system Disposable Loveshaw ink cartridges that are simple to snap-in and snap-out for easy ink replacement RS-232C interface .
Z640	Innovative high definition printhead for printing on porous substrates Unrivaled 12.1″ SVGA full colour touch-screen panel 12.1″ SVGA full colour touch screen panel 3 GB ROM flash memory for message storage 1 GHz microprocessor – without fan better suited to industrial applications 1 GB RAM storage Windows XP embedded as the operating system Print parameters are stored with each message Automatic printing cost calculator Multiple foreign languages with operator prompts Ability to communicate with advanced management software Operator multi level password access Report functions Suitable to drive simultaneously up to two printheads either 102 mm (4”) (T768) or 50mm (2”) (T384 and T384 FDI) – Trident print head technology High contrast patented inks for printing barcodes in accordance with the GS1 coding standard All available Windows True Type fonts Character bold factor up to 6 times Line speed capability: up to 90 meter/min, single line (295 ft/min) Incremental increasing / decreasing product counters up to 9 digits Fixed and variable text fields Repeat print-message function Printing in all moving directions
CIJ (Continuous Ink Jet)
Z3000	Compact design for easy set-up and movement between production lines Up to 2 lines coding with height from 0,8 to 12mm IP53 rated enclosure for light to medium harsh environments with positive pressure supplied to printhead Advanced hydraulic system with high efficiency and reliability Automatic visible double flushing with solvent recycling Character height range: selectable from 1 to 12mm (0,04” – 0,47”) Line speed capability: up to 320 meter/min, single line (1050 ft/m) Font matrix: 5×5, 7×5, 9×7, 16×10 100 message storage (up to 32 Kbyte memory capacity) 250 characters storage per message Bold factor: up to 8 times Graphics / logo creation and printing with storage of up to 30 logos High brightness backlit WYSIWIG display 240×128 pixel Automatic flushing of the printing head with solvent at start-up and shutdown Single, continuously variable gear pump drive provides supply and scavage side volume RS-232 serial interface Conduit length: 2 meter (6,56 ft.) Special languages keyboard (optional) Single START/STOP button Automatic viscosity and temperature control Operator password access – multi-level access Incremental / decreasing product counter up to 9 digits Automatic date function
Z4700	Can mark on almost every kind of surfaces, positioning the printhead in all moving directions Texts of up to 4 lines may be obtained by using several combined printing Matrix IP55 rated enclosure for medium harsh environments with positive pressure supplied to printhead Excellent printing quality, the result of an Innovative 32 dots technology Can mark on almost every kind of surfaces, positioning the printhead in all moving directions Suitable for both standard and pigmented ink and can print any type of barcode (including 2D) Up to six languages may be selected from the console Easy one start/stop button Automatic flushing of the printing head with solvent at start-up and shutdown Dual, independently driven, continuously variable gear pump drives provide maximum stability and reduction of consumables Character height range: selectable from 0.8 to14 mm (0.032” – 0.5647”) Line speed capability: up to 300 meter/min, single line (980 feet/min) 250 message storage with 8 character name (up to 32 Kbyte memory capacity) Up to 250 characters storage per message Bold factor: up to 8 times Tower printing (90° text rotation) 50 graphics / logos storage Incremental increasing / decreasing product counter up to 9 digits Operator password access – multi-level access This system is the only in the range, with 2 different conduit lengths (standard 4 meter, optional 2 meter), to suit any working situation
Z5000	Can mark on almost every kind of surfaces, positioning the printhead in all moving directions Texts of up to 5 lines may be obtained by using several combined printing Matrix IP65 rated enclosure for harsh environments with positive pressure supplied to printhead Excellent printing quality, the result of an Innovative 32 dots technology Can mark on almost every kind of surfaces, positioning the printhead in all moving directions Suitable for both standard and pigmented ink and can print any type of barcode (including 2D) Up to six languages may be selected from the console Easy one start/stop button Automatic flushing of the printing head with solvent at start-up and shutdown Dual, independently driven, continuously variable gear pump drives provide maximum stability and reduction of consumables Character height range: selectable from 0.8 to14 mm (0.032” – 0.5647”) Line speed capability: up to 300 meter/min, single line (980 feet/min) 250 message storage with 8 character name (up to 32 Kbyte memory capacity) Up to 250 characters storage per message Bold factor: up to 8 times Tower printing (90° text rotation) 50 graphics / logos storage Operator password access – multi-level access Incremental increasing / decreasing product counter up to 9 digits