Description
Features:
- Belt: 6″ wide PVC-120 with clipper lacing. 12″ wide for 32″ between frame and larger
- Bed: roller bed with 1.9″ diameter x 16 gauge galvanized “pop-out” tread rollers spaced on 3 in centers and 1.9″ diameter x 16 gauge galvanized pressure rollers spaced on 6″ centers
- Height: supplied with adjustable “H” type supports on nominal 10 ft centers
- Drive pulley: 4″ diameter with 1-3/16″ diameter shaft or 8″ diameter with 1-7/16″ diameter shaft, crowned and fully lagged
- Tail pulley: 4″ diameter with 1-3/16″ diameter shaft, crowned
- Snub roller: 2-1/2″ diameter galvanized with grease packed ball bearings (adjustable)
- Return rollers: 1.9″ diameter. galvanized with grease packed ball bearings
- Take-up: provides belt take-up at tail pulley to allow for future belt stretch
- Bearings: sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys
- Speed reduction: sealed worm gear “c” face speed reducer – #50 roller chain to drive
- Conveying speed: constant speeds available from 25 to 180 fpm
- Guard rails: various ranging from solid side formed angles to adjustable formed channel
Specifications:
Load:
- Load capacity: maximum load per linear foot with legs on 10 ft centers – 310 pounds
Structure:
- Finish: powder coated with an available range of RAL colours
- Frame: 6-1/2″ deep x 1-1/2″ x 12 gauge galvanized steel channel frames – standard 5 ft and 10 ft long bolt-together sections with bolt-on end couplers
- Motor: powered with 1/2 Hp to 2 Hp, totally enclosed, fan cooled, “c” face
Electrical Requirements:
- 120V 1 phase, 230 V 1 phase, 230/460V 3 phase and 575V 3 phase
Options:
- Electrical controls
- Guide rails of various types
- Conveyor speed
Reviews
There are no reviews yet.