Shop

Features:

• Belt: 1-1/5″ pitch Habasit PR-612-1.6 constructed from acetal and nylon rods for radius applications with underside hold-down tabs
• Drive shaft will consist of a 1-1/4″ diameter stainless steel drive shaft with multiple 13 tooth molded acetal sprockets at sprocket centre distance not exceeding 6″
• Snub shaft consists of 1″ diameter stainless steel round bar with 3″ diameter UHMW-PE rollers held in place with shaft collars and ensures positive sprocket engagement
• Idler shafts consists of 1″ diameter stainless steel round bar with 3″ diameter UHMW-PE rollers held in place with shaft collars
• Transfer plate at infeed constructed from rigidized stainless steel
• Can be supplied with a KB Electronics KBAC-24D AC frequency drive or controlled by a central panel.

Specifications:

Load:

• Straight run: 600 pounds/ft total live load per driven section is dependent upon inclination, accumulation and belt width
• Curve run: 200 pounds/ft

Structure:

• Frame: 11 gauge stainless steel side plates with bolted, 1″ round bar cross members with all rail supports welded
• Stands: 1-1/2″ x 1-1/2″ X .120″ wall stainless steel tubular legs that are welded and bolted to frame at centres that do not exceed 120″
• Feet: can be supplied with either NGI stainless steel hygienic 5/8″ NC leveling pads that provide adjustability of ± 2″ for hygienic applications or Marbett tubular inserts and threaded feet for standard use

Electrical Requirements:

• 120V 1 phase, 230 V 1 phase, 230/460V 3 phase and 575V 3 phase

Options:

• Casters, transition plates and end stops
• Electrical controls
• Belt construction
• Conveyor speed
• Guard rails: various ranging from solid side plate to adjustable Value-Guide systems