Shop

Control Panel Features:

• Variable frequency drive activated by position sensor when nozzles are in the fill

position.

• Speed and acceleration adjustability.
• Fill time controlled by operators’ time stepping on the footswitch.

Main Component Features:

• 96 gallon per minute, 1 Hp, 3phase, 316 stainless-steel centrifugal pump.
• Hardened stainless-steel calibrated shafts with linear bearings for nozzle rack movement  smoothness and durability.
• 10-inch stroke air cylinder with magnetic sensors for nozzle up and down movement.
• 316L stainless-steel sanitary check valve mounted on pump.
• Hand wheel and shaft mounted stoppers for height and stroke adjustment.

Standard Features:

• Nozzle spacing fully adjustable through top screw.
• Container height adjustment from 1½ to 16 inches high.
• Nozzle stroke adjustments from 0 to 8 inches.
• Will work with plastic, glass, and metal containers.
• No change of parts needed for various types of containers.
• Air filter-regulator and safety lockout valve included.
• Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders.

Non-motorized Conveyor:

• The machine includes a 10ft non-motorized conveyor with a stainless-steel top plate where the containers slide.

• One set of tool-less height and width guide rail adjustment.

Electric And Pneumatic Requirements:

• 120 volts, 50Hz or 60Hz, 10 amps
• 5 CFM @ 80 psi

Nozzles:

• Pressure overflow nozzles manufactured in 316L stainless steel, comes standard with
• VitonO-rings, Teflon seals, black nylon spacers, and soft polyurethane bottle to nozzle seal.

• Sizes available: 3/4, 5/8, 1/2, 3/8, and 1/4 inch.

Tank level control options:

• Pneumatic valve actuated by 5-inch, stainless-steel float, mounted on side of tank.
• Pneumatic actuated ball valve to be driven by pneumatic valve.
• Pressure switch for electrical circuit connections (electric pump start and stop).