Description
General:
- Bag width: 2″ to 32″
- Bag length: 4″ to 36″
- Seal style:
- Bead Trim, Smokeless and odourless seal and trim, 1/8″ smokeless and odourless seal and trim, 1/8″ to 1/4″ seal and trim, 1/16″ to 1/8″ hot bar seal and trim.
- Smokeless and odourless 5/16″ wide split seal trimmed with cold wire trim on centreline.
- Impulse seals with optional bead trim seal, recommended for thick substrates and where hermetic water and air tight seals are required.
- Materials accepted: Polyethylene, polypropylene, polypropylene seals without angel hairs, co-extrusions, laminations, Mylar, and Tyvek are also compatible. Note: Polypropylene requires an optional filter regulator and a step-up voltage transformer.
- Available in base widths of 22″, 26″ 30″, and 36″.
- Upper and lower adjustable stainless steel side guides.
- Air supply: Compressed air required. Recommended 80 to 90 psi operating pressure.
- Designed to operate with all SBP
Features:
- Accurate heat controls.
- Bypassing micro-switch. Unit is operated in manual or automatic mode resulting in costly elimination of down time.
- Dwell timer and dedicated impulse timer.
- Air cooling timer.
- Spare parts kit is included.
- Hinged sealing chamber.
- Complete with automatic scrap removal and scrap accumulator in the form of knitted bag.
- Preheat design on Smokeless and odourless models thus eliminating warm up time.
- Unitized stand for Speedy Bagger and Drop Sealer.
Structure:
- Welded heavy duty chassis steel construction.
- Stainless-steel contact surfaces.
- Quick and accurate length and width adjustments are accomplished in seconds.
Electrical Requirements:
120 volt, 1 amp, 1 phase, 60 cycle
Options:
- Polypropylene sealing capability includes transformer and air regulator.
- 220-volt air generator.
- Heavy duty painted steel unitized stand for drop sealer and bagger.
- Extra long sealing chamber.
- Safeguard device to prevent harm to operator’s hand.
- Compression plate to evacuate excess air from bag prior to sealing.
- Electronic cycle counter.
- Ident code seal with optional smokeless and odourless seal and trim.
- 1/16″, 1/8″, 3/16″, 1/4″ hot bar sealers with digital temperature controller.
- 20″ sealing width.
- 240-volt supply.
Reviews
There are no reviews yet.