Let’s Talk

Packaging Machinery Concepts Ltd. provides businesses with cutting-edge packaging and handling solutions.

icon_widget_image (905) 212-7046 icon_widget_image info@pmcltd.ca icon_widget_image 939 Matheson Boulevard East Mississauga, Ontario. L4W 2R7 icon_widget_image Monday-Friday: 7:30am to 5:00pm, Weekends: available on call
Image Alt
Explore the Features

Shop

Etiam scelerisque tortor at lectus dapibus, nec fermentum.

Packmaster Vertical Form / Fill / Seal

Main Uses

  • Vertical, folded film “L” sealer adaptable for automatically fed product

Quick info

Category:

Description

General:

  • Jaw configuration: Pouching jaw – type A and bagger jaw – type B are available. Machine will come with one jaw assembly. Both can be ordered and changeover can be undertaken in a twenty-minute period.
  • Bag width (type A): 1″ to 11″
  • Bag length (type B): 1″ to 8″
  • Bag width (type B): 1″ to 8″
  • Bag length (type A): 1″ to 11″
  • Seal: 10″ vertical x 12″ horizontal hot knife jaw.
  • Seal type: Hot wire trim approximately 1/8″ outside seal.
  • Jaw opening: Up to 3″ wide adjustable.
  • Materials accepted: Centre folded polyethylene, LLDPE, both plain and pre-printed, and shrink films.
  • Operation: Random or fixed bag length cutoff that can set at the control panel. Automatic or manual operation modes are selectable at the main panel.
  • Productivity: Dependent upon product size, substrate composition and thickness, up to 30 bags per minute can be achieved. Based upon our site visit, and with samples provided, we can specify 25 bags per minute operation.
  • Film feed: AC drive motor. Primitive mechanical film feed length adjustment is replaced by PLC control interfaced with an electronic shaft encoder which produces greater consistency in bag length.
  • Footprint dimensions: 36″W x 36″D and taking into consideration control panel and roll film diameter. Compact design yields a 10% larger seal length capacity.
  • Guiding: Film web guides which are easily adjusted without tools.
  • Air supply: Clean, dry compressed air required with minimum supply pressure of 80 psi.
  • Compatibility: Can be easily integrated with automatic loading systems.

Features:

  • Accurate heat control is achieved with the incorporation of a dual digital PID control with heat range up to 500 degrees F and repeatability of +/- 2 degrees F. Temperature is measured at the blade not at the heater resulting in faster set-ups and easier troubleshooting.
  • Manual override is available.
  • Bag length, dwell time and random length controls are located on a keypad.
  • Complete with automatic wind-up scrap removal and accumulator.
  • Smokeless and odourless.
  • Locking E-stop and seal jaw safety interlock.
  • “A” and “B” wind rolls
  • Product photo-eye for automatic operation is standard.
  • Film advance button for manual jogging operation.

Structure:

  • Welded heavy duty chassis steel construction.
  • “L” shaped side frame members provide for a less obstructed product area to encourage hot knife maintenance.
  • A simple pivoting jaw assembly is integrated.
  • Stainless steel contact surfaces.

Electrical Requirements:

120 volt, 1 amp, 1 phase, 60 cycle

Options:

Print registration.

Reviews

There are no reviews yet.

Be the first to review “Packmaster Vertical Form / Fill / Seal”

Your email address will not be published. Required fields are marked *

Product Inquiry Contact us to learn more about this product

"*" indicates required fields

[contact-form-7 id="8d448f1" title="Get Quote"]