Description
Features:
- Width (overall): 6-1/2″ greater than conveying surface width
- Width (conveying surface): ranging from 3″ to 95″ in any increment 52″
- Width (between frame rail): 3-1/4″ greater than conveying surface width
- Length (overall): ranging from 1′-0″ through 12 -0″ bed section – overall length determined by application load
- Rollers: 2-1/2″ x 11 gauge wall un-plated rollers on centers ranging from 2-13/16″ to 5-1/2″ and up in +1/2″ increments
- Axle: 11/16″ pin retained hex axle
- Drive: side high mounted, located near center of conveyor – sealed worm gear speed reducer with “c” face for motor mounting
- Motor: powered with 1/2 Hp to 5 Hp, totally enclosed, fan cooled, “c” face
- Bearings: sealed, pre-lubricated ball bearings, #102041
- Chain: no. 60 roller chain between rollers – # 60 main drive – dependent upon roller diameter and centers
- Conveying speed: factory preset ranges from 5 to 150 fpm
- Guardrail: available to be mounted on side opposite the chain guard – formed 10 gauge.
Specifications:
Load:
- Load capacity: 1,000 pounds per linear ft – up to 20,000 pounds uniformly distributed load – 580 pounds per roller
Structure:
- Finish: powder coated with an available range of RAL colours
- Frame: 6″ x 8.2 lb. structural channel frame, welded and painted and bolted together with butt couplings
- Legs: supplied with welded “H” type supports on maximum 5 ft centers – constructed from 4″ x 5.4 lb structural channel
Electrical Requirements:
- 120V 1 phase, 230 V 1 phase, 230/460V 3 phase and 575V 3 phase
Options:
- Electrical controls
- Guide rails of various types
- Conveyor speed
Reviews
There are no reviews yet.