Width (overall): standard ranges from 12″ to 36″ in 6″ increments
Width (belt): 5″ less than overall width
Length (overall): standard ranges from 5′ to 102′
Belt: various – ranging from black PVC to white RMP with clipper lacing or cold spliced endless seam
Drive: end drive, underneath (typically)
Drive pulley: ranges from 4″ to 8″ diameter with 1″ diameter shaft at bearings – fully lagged and machine crowned for improved tracking
Tail pulley: 4″ diameter with 1″ diameter shaft at bearings – machine crowned
Take-up: typically 4″ of belt take-up is provided by screw take-up mounted at tail pulley
Bearings: sealed, pre-lubricated, self-aligning cast iron ball bearings on drive and tail pulleys
Motor: powered with 1/2 Hp to 2 Hp, totally enclosed, fan cooled, “c” face
Speed reduction: sealed worm gear “c” face speed reducer – #50 roller chain to drive pulley
Conveying speed: constant and variable speeds available from 10 to 200 fpm
Guard rails: various ranging from solid side formed angles to adjustable formed channel
Specifications:
Load:
Load capacity: dependent upon belt speed, belt width and conveyor length
For example: ½ Hp drive with 12 t o 16″ belt width, 7 to 52 feet length and 60 feet per minute will provide 250 lb. maximum total live load. The same conveyor with an 8″ diameter drive pulley and 2 Hp will provide total maximum load capacity of 1680 lb.
Structure:
Finish: galvanized
Bed: 3-1/2″ x 12 Gauge galvanized formed steel channel frame bolted together with butt couplings – bed sections are bolted together with splice plates
Stands: supplied with adjustable “H” type supports on nominal 10 ft centers
Electrical Requirements:
120V 1 phase, 230 V 1 phase, 230/460V 3 phase and 575V 3 phase
Options:
Electrical controls
Guide rails of various types
Belt construction
Conveyor speed
Reviews
There are no reviews yet.
Be the first to review “Slider Bed – Model BCST 100” Cancel reply
Reviews
There are no reviews yet.