Shop

General:

• Seal style:
  • 1/8″ wide hermetic, smokeless and odourless seal.
  • 1/4″ wide hermetic, smokeless and odourless seal.
  • 3/8″ wide hermetic, smokeless and odourless seal.
• Seal band: 1″ wide X 40″ long x 8 mil., heavy duty Teflon sealing bands with reinforced butt splice.
• Materials accepted: Polyethylene, polypropylene, Tyvek, Poly Mylar, foil/PE, Cryovac, co-extrusions, nylon, and polylaminates.
• Frame: Conveyor and sealing head are mounted on an integrated 4 ft high stand that allows for adjustable sealing height with hand crank height adjuster. Provides 10″ of height adjustment.
• Conveyor: Supplied with 6″ wide slider bed conveyor with overall length of 5′-0″ and driven from discrete Bodine AC synchronous gear motor from a common KB Electronics AC drive that also powers the Teflon
• Sealing drive: Heavy duty gears and stainless-steel shafting throughout.
• Sealing assembly: Chrome plated brass seal bar assemblies with a post nickel plated cooling section. Heating section consists of a 5″ long rear bar with a 305 W element and two 2-1/2″ long front bars each with a 125 W element. Uses heavy duty 6 mil thickness Teflon bands, left and right to isolate the substrate to be sealed from the sealing bars.
• Sealing head adjustment: Crank handle vertical positioning of sealing head can be varied through a total range of 10″.
• Bag transport: One set of ½” wide urethane belts located below the seal bands is responsible for positively transporting the bag through the sealer.
• Speed: Up to 45 fpm with two ultra quiet, synchronized AC gear motors.
• Scrap removal: Not applicable.
• Air supply: No compressed air required.
• Compatibility: Can be used either with manual feed or in conjunction with fully automatic bagging systems.
• Approval(s): USDA. All electrical components are UL approved. Included is Electrical Safety Authority inspection and certification.

Features:

• Accurate CAL digital temperature controller maintains +/- 2 degrees temperature with 500-degree F maximum.
• Washdown white urethane belt with stainless steel lacing

Structure:

• Welded heavy duty chassis steel construction.
• Stainless steel shafting and heavy duty gearing in the belt drive assemblies.
• All covers are stainless steel.

Electrical Requirements:

120 volt, 1 amp, 1 phase, 60 cycle

Options:

• Single and double line embossing encoder.
• Wing infeed guides.
• Mirror image (left to right flow).
• Product counters.
• Stainless steel stand.
• 12″ conveyor width.
• 240 volt supply.
• Casters